* PERIPHERAL PTR7 UNIVERSAL LATCHING/TIMER/PULSER RELAY MODULE :: GPS and Navigation

* PERIPHERAL PTR7 UNIVERSAL LATCHING/TIMER/PULSER RELAY MODULE - THE BEST MULTI FUNCTION RELAY TIMER MODULE! Can function as:
·Low Voltage Trigger ·Alpine Video System Brake Input Bypass ·Latched Output from a Variety of Input Scenarios ·Double pulse output ·Closed loop circuit ·Pulse extender ·Horn Honk Output ·Linear Actuator Controller ·Doorlock Pulse Creator ·Channel Expander ·Programmed Pulse Input to Pulsed or Constant Output Device ·Up To Three Timed Outputs Simultaneously ·Sequential Latched Outputs

This thing does everything, low voltage trigger, CVA 1006/D900 bypass, Latching, Double Pulser, Closed Loop Drive, Pulse Extender, Horn Honker, Channel splitter, and MUCH MORE! ONE MODULE! (CHANNEL CREATOR!)

---- THERE ARE MORE PICTURES BELOW, SCROLL DOWN or CLICK HERE---

Related products (click to take a look)
**RELAY 30 /50 AMP SPDT RELAY - WITH HARNESS #319	$5.50
*RCA SWITCHING DEVICE BY PAC (AS21A SIGNAL SWITCHER) #4541	$41.00
*TRUNK: UNIVERSAL ELECTRIC TRUNK RELEASE CONVERSION KIT #216	$21.00
FORD LOW VOLTAGE ANTENNA TRIGGER (BETTER VERSION) #1383	$18.50
RELAY PULSE TIMER RELAY (DELUXE) #1248	$29.95

This baby does everything. This replaces our CHANNEL CREATOR. Want to add a remote start to the factory keyless entry? This unit will do it.

Looking for a low voltage trigger? It will take anything that is around 5 volts and send out a 12 volt remote output

Will bypass the video on a CVA21005/1006/1003, ICA CV800

Latch and unlatch output from a pulsed input. Turn on headlights, neon, etc from an momentary output

Double pulse generator, use in alarm applications where the unlock wire needs 2 pules to unlock all doors

Closed loop circuit, protect trailers on hitches, foglights etc. triggers alarm when wire is cut

Pulse extender, upon a constant or pulsed trigger, the TR 7 will turn on the outputs. As soon as thhe trigger is dosconnected, turned off or at the end of a pulse, the timer will count up to the number of seconds recorded (PULSE TIMER) at which time the output wil turn off. Good for turning on headlights at night

HORN honk output module. On older aftermarket alarms, it may be difficult to disarm the alarm with RF remote when horn is honking. This will give you a 2 second delay betwen honks giving you time to disarm the alarm. Unique horn honking to distinguise your car from others. Perfect to add horn honking to any alarm.

Linear actuator controller, open and close amplifier racks from a momentary source like from an alarm negative output. Sequence is START, STOP, REVERSE, STOP

Doorlock pulse generator : Add ignition control doorlocks

Channel splitter! Split 1 channel from an alarm to 2 outputs! ADD EXTRA OUTPUTS!! Both outputs are programmable for pulsed, latched or timed output

Pulses to constant output. COUNTS a number of user programmable pulses within a programmed time. Good for triggering tracking decies.

3 timers in 1. Upon a constant trigger, all 3 outputs are user programmable to delay before turnon outputs or turning on instantly then delay before turning off outputs. Good for situations where you need more than 1 timer but on a different timer period without having multiple modules

Pulses to LATCH/UNLATCH- Momentary to latch and unlatch a circuit

Pulses to pulse output. Upon a number of pulses within a user programmed time, the OUTPUT will pulse (USE this with any remote start in our alarm department, use it with your FACTORY alarm or keyless entry, hit lock twice and it will REMOTE START your car or other). Programmable to see X amount of pulse before activation (IE: 3 pushes of the LOCK button on your factory transmitter before output is sent)

Pulses to timed output. PULSE TIMER

Latching outputs. 1st pulse will latch one wire. 2nd will unlatch first wire and latch 2nd wire, 3rd pulse will latch both wires. 4th turns off both wires. PERFECT for applications like foglights or other lights which have LOW and HIGH BEAM or for 2 stage accessories!

THIS THING DOES EVERYTHING! GET IT!

• Low voltage trigger

• CVA-1005 Video Bypass

• Latching outputs

• Double Pulse Output

• Pulse Extender

• Horn Honking Output

• Linear Actuator Controller

• Doorlock Pulse Generator

• Channel Splitter

• Pulses to Constant output

• 3 in 1 timer outputs

• Pulses to latch/unlatch outputs

• Pulses to pulse output

• Pulses to timed output

• Latching outputs #2.

UPDATES FROM MANUFACTURER:
DIESEL vehicles.
Problem: The TR-7 will work for a short time and then stops working.
Solution: We recommend using a power noise filter in-line of the power wire of the TR-7 to suppress any electrical spikes caused by the ignition system.

TR-7 and Alpine IVA-D900 fix. You do not need this fix if the instructions that come with the TR-7 has a rev. 1.2.4 in the bottom left corner of instructions.