This adapter is COMPATIBLE with the FORD SYNC
Compatible with navigation radios

This adapter is compatible with cars with SIRIUS RADIO
This adapter is compatible with cars with rear DVD
This adapter is NOT compatible in cars with BOTH Satellite radio AND REAR DVD Entertainment
(See the PXAMG if you have that setup here)

Scroll down to see some compatible radio photos

INSTALLATION AND OPERATING INSTRUCTIONS FOR THE:
▼ FORD/CAN M-LINK2
& FORD/CAN AUX
Features:

• Full control and display of all iPod track information and names of Playlists, Genres, Artists, and Albums in "SRI" and "DVD extended" mode*.
• Works with all iPods with a bottom dock connector including the iPod Classic, 3rd Generation Nano, iPod Touch, and the iPhone*.
• No need to loose your factory Sirius tuner, the interface recognizes if you have the tuner installed and give you all the same options through the RSE/DVD input*.
• You can choose to control from the iPod just by selecting another source on the radio. No need to set switches on the interface*.
• Auxiliary audio input via the cars own "AUX" input, no need to loose your external CD changer.
• Compatible with most newer Ford, Lincoln, Mercury vehicles. Call for compatibility.

Mode Selection
To Select the Different iPod Modes Under the DVD menu: Press
the AUX button until "DVD" appears on the radio. This will either
render "DVD REMOTE" or "DVD EXTENDED" mode. To switch to
the other DVD mode the AUX button must be pressed to select DVD
appears.
To Select the AUX input while using the interface in DVD Mode:
Press the AUX button until the word AUX appears on the screen.
To Select the Different iPod Modes Under the SAT menu: Press the
AUX button, the SRI is "IPOD REMOTE MODE", SR2 is "IPOD
EXTENDED MODE", SR3 is "EXTERNAL AUDIO" audio input.
Button Function for Both Modes
For "Plav/Pause": Press the "Play/Pause OK", "Play/Pause", or "Scan" button.
For Previous and Next Track: Press the "< Seek" and "Seek >" or the comparable steering wheel buttons.
Using iPod in Remote Mode
To select any Plavlists. Artist, Albums. Genres. Songs, Settings, etc.: Use the iPod controls to select these features just as it were being used with headphones.

Basic Installation Instructions

• Make sure that the radio is off and the key is out of the ignition and remove the radio from the dash.
• Unplug the main harness and the accessory harness from the back of the radio.
• Install the two male harness connectors from the interface harnesses into the back of the radio.
• Insert the two male connectors that were just removed from the back of the radio into the two female connector from the interface harnesses.
• Connect the male 4-pin Molex connector from the main harness into the female 4-pin Molex connector on the accessory harness.
• If the vehicle has the satellite tuner built in, the interface will appear under the DVD option instead of SAT.
• Attach the iPod cable (FORD/M-Link2 only) and the audio source to the RCA connectors. Install the radio back into the dash.

Using iPod in Extended Mode
To View Menu: On most radios, hold the "Text/Scan" button until "PLAYLIST" appears. On others, press the "Text" button. To Select a Menu or Sub-Menu: On most radios, press the "Text/Scan" button. On others it is the "Shuffle" button.
For Previous and Next Item in Menu: Press the "< Seek" and

"Seek >" buttons.
To Scroll 15 Listing at a Time in any menu: In DVD mode, on most
radios, press the "Arrow UP/DOWN" button. On other radios, use the
tune knob. In SAT mode, use the "FF/REW" buttons.
To Play All Tracks for a Particular Plavlists, Artists. Albums, or
Genres: Once you have the selected Playlist, Artist, Album, Genre,
press "Play/Pause" so all tracks for that selection will play.
To Play an Individual Track, Artists, Albums, Genres or Songs:
Once you have the selected Playlist, Artist, Album, Genre, press
"Select" to select the individual Artist, Album and Track.
To Select "Shuffle off". "Shuffle Tracks", or "Shuffle Albums":        [
Select the "SETTINGS" menu and select one of the options.